Page 12 - GEF20100301_v13

HOLE DIGGING
671/753 Series DIG-R-TACH®
The M671-16 and M753-16 are used most often with skid steer loaders. Single speed roller chain reduction, high-torque, geroler-type, hydraulic motor. 1330 ft. lbs. drilling torque @2500 PSI hydraulic system pressure. Stub length connection hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source.
The M671-24 and M753-24 are used most often with tractor loader backhoes. Single speed roller chain reduction, high torque geroler type hydraulic motor with integral dual cross over relief valve to minimize internal damage from excessive pressure spikes. 2018 ft. lbs. drilling torque @2500 PSI system pressure. Stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source.
671/753 DIG-R-TACH®
671/753 Series DIG-R-TACH® Accessories
Skid Loader Mounting Frame
671-1100 Mounting Frame
Dipperstick Mounting Brackets
671-3200 Mounting Bracket
Model
M671-16
M671-24
M753-16
M753-24
Description
Two inch hexagon auger connection. For use with the 6710 Series augers and 6700 Series auger extensions. Refer to Page 11 for augers.
Two inch hexagon auger connection. For use with the 6710 Series augers and 6700 Series auger extensions. Refer to Page 11 for augers.
2-9/16 inch round auger connection. For use with the 6750 Series augers and 6780 Series auger extensions. Refer to Page 12 for augers.
2-9/16 inch round auger connection. For use with the 6750 Series augers and 6780 Series auger extensions. Refer to Page 12 for augers.
Model
671-1100
Description
For use with all skid loaders. (utilizing the BOBCAT® bucket attachment system)
Consult the factory for skid loader and backhoe mounting brackets not depicted.
Advise on backhoe brand, model plus dipperstick width and pin diameter dimensions.
Description
Weight
Weight
MSRP
255 lbs
$610.00
Model
MSRP
671-3000
For use with 1 inch diameter dipperstick pins.
For use with 2-1/2 inch diameter dipperstick pins.
Weight
285 lbs
295 lbs
285 lbs
295 lbs
45 lbs
68 lbs
MSRP
$2,059.00
2,744.95
2,059.00
2,744.95
Telephone: 1.800.533.0524 +507.451.5510 Telefax: 1.877.344.4375 +507.451.5511 Email: sales@generalequip.com
www.generalequip.com
$610.00
671-3100
For use with 1-1/2 inch diameter dipperstick pins.
53 lbs
610.00
671-3200
671-3300
671-3400
For use with 1-3/4 inch diameter dipperstick pins.
For use with 2 inch diameter dipperstick pins.
58 lbs
60 lbs
610.00
610.00
610.00
9
HOLE DIGGING