Page 10 - GEF20100301_v13

HOLE DIGGING 471/553 Series DIG-R-TACH®
Description
Model
M471-20
Designed to be utilized with compact tractor loader backhoes, mini type excavators and small tractor loaders. Not to be utilized as an earth drilling attachment with skid steer loaders or any carrier vehicle not equipped with a proper protective barrier to prevent auger contact with the operator during normal operation. Not designed to be mounted to the dipperstick bucket of compact tractor loader backhoes because of inherent center of gravity limitations. For use with the 4710 and 4750 Series augers. Refer to auger section for specific details. Less auger. Maximum drilling torque Series 12: 426 ft. lbs., or Series 20: 731ft. lbs. @3000 PSI.
Flow: 5-10 GPM (19-38 lit/min); pressure range: 1500-3000 PSI.
2 inch hexagon auger connection. For use with 4710 Series augers. Refer to Page 8 for augers.
471/553 DIG-R-TACH®
Flow: 7-12 GPM (27-46 lit/min); pressure range: 1500-3000 PSI.
2 inch hexagon auger connection. For use with 4710 Series augers. Refer to Page 8 for augers.
$1,225.00
Flow: 5-10 GPM (19-38 lit/min); pressure range: 1500-3000 PSI. 2-9/16 inch round auger connection. For use with 4750 Series augers. Refer to Page 8 for augers.
52 lbs
1,425.00
M553-12
Flow: 7-12 GPM (27-46 lit/min); pressure range: 1500-3000 PSI. 2-9/16 inch round auger connection. For use with 4750 Series augers. Refer to Page 8 for augers.
50 lbs
1,225.00
M553-20
471/553 Series DIG-R-TACH® Accessories
1,425.00
Model
471-1100A Mounting Frame
471-3130 Mounting Bracket
471-1000A Mounting Frame
Description
Universal bucket mount. For mounting to the front bucket of compact tractor loaders. Includes adjustable frame assembly for direct mounting; transport category, Grade 70, coil chain and adjustable turnbuckle attachments.
Weight
52 lbs
Weight
MSRP
M471-12
50 lbs
471-1200A 471/553 Series Mounting Frames Mounting Frame
MSRP
471-1000A
471-1100A
471-1105A
471-1110A 471-1200A
For 500 Series Bobcat® loaders equipped with standard Bob-Tach® System and compact tractor backhoe loaders utilizing the Bobcat® “universal” type mounting frame design.
100 lbs
For 400 Series Bobcat® loaders equipped with standard Bob-Tach® System. Not for use with 453 Bobcat loader.
95 lbs
95 lbs
95 lbs 50 lbs
$610.00
610.00
610.00
610.00 610.00
For 453 Bobcat® loader only.
For Toro Dingo®, Ramrod® and Finn® loaders (two pin vertical).
471-1300A
For Kanga® and Ariens® loaders (two pin horizontal).
50 lbs
610.00
Telephone: 1.800.533.0524 +507.451.5510 Telefax: 1.877.344.4375 +507.451.5511 Email: sales@generalequip.com
www.generalequip.com
7
HOLE DIGGING