Grind or Polish Concrete | M-Series Accessories

Tooling System

MAGNETACH® PCD Coatings Removal System

The MAGNETACH® PCD Coatings Removal System is designed for use with General's MAGNETACH® Tooling System and competitive surface grinding products utilizing the Lavina®/EDCO® magnetic tooling mounting configuration. The PCD (Polycrystalline Diamond) tooling is comprised of a diamond grit that is fused together under high pressure along with a catalytic metal. Used to remove thin-to-medium glues, mastics, covering materials and cement levelers from concrete surfaces. Sacrificial segments are provided for the PCD inserts to aggressively remove materials while at the same time acting as stabilizers and a depth guide to minimize damage to the cap surface. PCD tooling is direction sensitive and available in left- and right-hand rotation direction for use on single and dual head concrete grinding equipment.

Features:

• Designed for magnetic retention
• Dual PCD segment configuration
• Sacrificial, diamond stabilizer segment to minimize cap damage
• Color coded and rotation direction marked

Specifications:

NOTE: MAGNETACH® PCD rotation direction is determined as viewed from the machine operator position. Right-hand rotation denotes clockwise disc/tooling rotation. Left-hand rotation denotes counterclockwise dis/tooling rotation.

MAGNETACH® Tungsten Carbide Coatings Removal System

The MAGNETACH® Tungsten Carbide Coatings Removal System is designed for use with General's MAGNETACH® Tooling System and competitive surface grinding products utilizing the Lavina®/EDCO® magnetic tooling mounting configuration. The Tungsten Carbide Coatings Removal System efficiently removes a wide variety of urethanes, epoxies, paints and many other materials from concrete surfaces with unequaled ease and productivity. It can be a cost-effective alternative to costly shot blasting, grinding, manual scraping or use of dangerous chemicals for a wide variety of coatings removal projects. The two Quad-Sert™ inserts are constructed of a high Colbalt-grade, Tungsten Carbide and incorporate eight scraping edges for the lowest removal cost of any competitive system. It's also the only scraping system that is both statically and dynamically stable which dramatically minimizes surface cap damage to further reduce project costs.

The Tunsten Carbide System is the only product using Lord®-type, elastomeric mounts that allow the inserts to pivot about two axis. This unique design feature better follows minor variances in floor contours to maximize the material being removed. Their inherent elasticity better reduces the effects of damaging shock loads to the machine when anchor bolts or other floor obstructions are encountered. Available in left- and right-hand rotation direction for use on single and dual head concrete grinding equipment.

Features:

• Designed for magnetic retention
• 8-sided, Tungsten Carbide inserts
• Dual inserts minimize surface cap damage
• Plated finish resists corrosion
• Rotation direction marked

Specifications:

NOTE: SCRAP-R-TACH® rotation direction is determined as viewed from the machine operator position. Right-hand rotation denotes clockwise disc/tooling rotation. Left-hand rotation denotes counterclockwise disc/tooling rotation.

MAGNETACH® Diamond Segment Grinding System

The MAGNETACH® Diamond Segment Grinding System is designed for use with General's MAGNETACH® Tooling System and competitive surface grinding products utilizing the Lavina®/EDCO® magnetic tooling mounting configuration. The Diamond Segment Grinding System offers solutions for a wide variety of surface preparation job applications. Matrix bonds are available for both soft/medium and hard concrete formulations with a grit range of 18 to 100. Decreasing grit size allows for meeting specific surface finishes requirements up to a pre-polish condition. The double segment design configuration offer the best combination of aggressiveness versus service life for the applied machine weight. Depending on the application, the matrix formulations can be used on things such as green concrete or fully cured concrete, high tensile epoxies and many thin-film coatings.

Features:

• Designed for magnetic retention
• Omni-directional machine loading
• Soft/medium and hard concrete bonds
• Wide range of grit sizes

Specifications:

If you do not find what you are looking for please contact our Sales Team.

Photos are representative only. Actual product may vary due to COVID related supply chain issues. Some components may be substituted as a result but will not affect overall function or quality of product received. Please call 1.800.533.0524 if you have any questions or concerns before placing your order.