The
Innovation
Just Keeps Coming!

No company embodies innovation more than General Equipment! Looking ahead, General Equipment has a steady flow of new, updated and exciting products that are built with your customers and your ROI in mind. So get fired up! General Equipment engineers have been hard at work, pushing boundaries, crunching numbers and burning the midnight oil to bring you the latest and most innovative products for hole digging, surface preparation and ventilation in 2020!

MAGNETACH® Tooling System

MAGNETACH® Tooling System

Now here’s innovation that really connects! General Equipment’s MAGNETACH Tooling System utilizes the Lavina/EDCO magnetic tooling mounting configuration. This series of surface prep accessories is designed for magnetic retention and delivers all the performance and productivity you expect from General Equipment.

Magnetach® Accessories include:

  • Diamond Segment Grinding System
  • PCD Coatings Removal System
  • Tungsten Carbide Coatings Removal System

Available! Now in Stock!

Spec Sheet
M-Series Grinders

M-Series Surface Grinders

Increase your magnetic force field, make an impact and become a MAGNETACH® grinding guru. M-Series Surface Grinders accept all industry standard MAGNETACH® Diamond, Tungsten Carbide and PCD magnetic grinding and scraping attachments. They also accept products that use the Lavina®/EDCO® magnetic tool mount setup. Get the finish you desire and the job done right!

Available! Now in Stock!

Spec Sheet
EPIC® Series Hole Diggers

EPIC® Series Hole Diggers

In a world full of ordinary construction products, it's time for something EPIC! Leave it to General Equipment to design and build the next generation of hole diggers! The EPIC® Series of one man and two man hand-held Hole Diggers can tackle a wide range of homeowner and contractor projects while delivering the optimum performance and unmatched ROI! General Equipment, Epic, yeah, that sounds about right!

  • Power-GRIP® and Power-FLEX® operator handles
  • Auger-LOK® for stuck auger removal
  • Honda engines

Available! Now in Stock!

Spec Sheet
2350 BOR-MAX® Series Earth Augers

2350 BOR-MAX® Series Earth Augers

General Equipment’s unmatched field experience and over five decades of auger design expertise combine to create this line of earth augers. Available for use with General 200 series hole digging products, the 2350 BOR-MAX® Series delivers unmatched digging performance in 51 mm (2 inch) to 305 mm (12 inch) nominal diameters. The augers feature field replaceable alloy steel cutting teeth that are cold forged and heat treated to extend service life.

Available! Now in Stock!

Spec Sheet
FCS10GEN2 RIP-R-STRIPPER® FLOOR COVERING STRIPPER

FFCS10GEN2 RIP-R-STRIPPER® FLOOR COVERING STRIPPER

The FCS10GEN2 RIP-R-STRIPPER…the name itself says industry revolutionizing product line. And don’t let the size fool ya; the FCS10 works circles around larger stripper machines that lack the same agility and maneuverability. Its small size and lightweight design makes it highly productive in hard to reach areas such as bathrooms, closets and foyers. The FCS10 is a highly productive solution for removing a wide range of floor covering materials found on both commercial and DIY projects.

Available! Now in Stock!

Spec Sheet
CTS10 RIP-R-STRIPPER® FLOOR COVERING REMOVAL STRIPPER

CTS10 RIP-R-STRIPPER® FLOOR COVERING REMOVAL STRIPPER

The new CTS10 RIP-R-STRIPPER continues the tradition of innovation, productivity and elite design that General Equipment surface preparation products are known for. The CTS10 RIP-R-STRIPPER provides for the fast and easy removal of ceramic floor tiles and engineered wood flooring materials from concrete surfaces. The unit accepts popular, 35 lb. class, electric jackhammers manufactured by Bosch, DeWalt, Hitachi, Hilti and Makita.

  • GEN-TACH™ breaker quik-release system
  • 5-position, breaker adjustment system
  • Anti-Vibe™ rubber isolated operator handle

Available 3rd Quarter 2020, Notify Me when it becomes available!

Notify Me Spec Sheet
FCS16-1050 RIP-R-STRIPPER® SCORING BLADE

FCS16-1050 RIP-R-STRIPPER® SCORING BLADE

The FCS16-1050 Scoring Blade was designed specifically for removing VCT and sheet-type floor covering materials in high traffic areas from concrete surfaces. The blade features a 3-inch cutting width with additional side scoring wings that slice linoleums and glued-down carpets into manageable strip widths. Designed for use with all General manually propelled tile strippers as well as a variety of competitive products.

Available! Now in Stock!

Spec Sheet
SG7 SURFACEPRO™ EDGE GRINDER

SG7 SURFACEPRO™ EDGE GRINDER

When the job calls for maneuverability and sure-handedness, the SG7 SurfacePro Edge Grinder from General Equipment is ready for action. Intended for smaller area job applications, is a highly productive solution to grinding or leveling concrete and asphalt surfaces found in both commercial and DIY projects. The walk-behind design keeps operators off their knees reducing stress and strain while increasing overall productivity and comfort over hand-held grinders.

  • 7 inch diamond cup type wheel
  • Flexible dust shroud with flip top front for edge grinding
  • Detachable steel handle
  • Anti-Vibe™ caster wheels

Available! Now in Stock!

Spec Sheet
EP30 TEMP-BUST-R® VENTILATION FAN

EP30 TEMP-BUST-R® VENTILATION FAN

From the company that offers the most complete line of confined space and positive pressure ventilation products comes the Model EP30 Ventilation Fan. The EP30 is an excellent choice for a variety of ventilation and climate control applications such as trench and general construction, industrial, general demolition, oil and gas and other work environments. Heavy-gauge steel tube and plate frame, reinforced composite fan blades, high strength wheel hub and bearings plus, a tough powder coat finish and plating are engineered to ensure a long service life.

Available 3rd Quarter 2020, Notify Me when it becomes available!

Notify Me Spec Sheet
AF501 AIR-SCRUB-R™ PORTABLE HEPA AIR FILTER

AF501 AIR-SCRUB-R™ PORTABLE HEPA AIR FILTER

If compact, portable, HEPA filtration is what you need, look no further than the AF501 AIR-SCRUB-R™! A two- stage design features a pre-filter and a high efficiency HEPA filter for outstanding air filtration, while the variable speed motor offers adjustable airflow rates up to 500 CFM. Need more than one? Just daisy-chain multiple units together on a single circuit using the integral GFCI outlet and 12 Ampere breaker. It’s all right there, General Equipment style!

  • 30% pre-filter
  • 99.97% efficient @ 0.3 micron HEPA secondary filter
  • Clean filter indicator light
  • 56-72 dBA sound level
  • Stackable, lightweight, transportable

Available! Now in Stock!

Spec Sheet
DB Series Dust Collection Bag

DB SERIES DUST COLLECTION BAG

Whether you're talking about drilling, sawing, sanding, chopping or dust generated by sweeping and brushing that may create a dust compliance issue, the DB Series Dust Collection Bag is an easy and cost effective way to perform dust extraction at the source. Easy to use and can be cleaned for reuse! Use in conjunction with confined space ventilation blowers by simply attaching to the outlet side of the blower and turning the blower on.

  • 85% filtration efficiency
  • Washable, non-woven polyester
  • Available in 8-, 12-, & 16-inch nominal diameters

Available! Now in Stock!

Spec Sheet

General Equipment Company is your one-stop shop for hole digging, surface prep, ventilation and lighting.

Shop Other General Equipment Products

General logo

Call 800-533-0524

No One Does It Better, General Equipment!